1983 Alfa Romeo Alfasud vs. 2010 SsangYong Stavic
To start off, 2010 SsangYong Stavic is newer by 27 year(s). Which means there will be less support and parts availability for 1983 Alfa Romeo Alfasud. In addition, the cost of maintenance, including insurance, on 1983 Alfa Romeo Alfasud would be higher. At 2,696 cc (5 cylinders), 2010 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2010 SsangYong Stavic (163 HP @ 4000 RPM) has 59 more horse power than 1983 Alfa Romeo Alfasud. (104 HP @ 6000 RPM) In normal driving conditions, 2010 SsangYong Stavic should accelerate faster than 1983 Alfa Romeo Alfasud. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Stavic weights approximately 1053 kg more than 1983 Alfa Romeo Alfasud. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 SsangYong Stavic is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 SsangYong Stavic. However, in wet, icy, snow, or gravel driving conditions, 1983 Alfa Romeo Alfasud, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Stavic (342 Nm @ 2400 RPM) has 209 more torque (in Nm) than 1983 Alfa Romeo Alfasud. (133 Nm @ 4000 RPM). This means 2010 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1983 Alfa Romeo Alfasud. 2010 SsangYong Stavic has automatic transmission and 1983 Alfa Romeo Alfasud has manual transmission. 1983 Alfa Romeo Alfasud will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Stavic will be easier to drive especially in heavy traffic.
Compare all specifications:
1983 Alfa Romeo Alfasud | 2010 SsangYong Stavic | |
Make | Alfa Romeo | SsangYong |
Model | Alfasud | Stavic |
Year Released | 1983 | 2010 |
Engine Position | Front | Front |
Engine Size | 1488 cc | 2696 cc |
Engine Cylinders | 4 cylinders | 5 cylinders |
Engine Type | boxer | in-line |
Horse Power | 104 HP | 163 HP |
Engine RPM | 6000 RPM | 4000 RPM |
Torque | 133 Nm | 342 Nm |
Torque RPM | 4000 RPM | 2400 RPM |
Engine Bore Size | 84 mm | 86.2 mm |
Engine Stroke Size | 67.2 mm | 92.4 mm |
Engine Compression Ratio | 9.5:1 | 18.0:1 |
Top Speed | 180 km/hour | 174 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 870 kg | 1923 kg |
Vehicle Length | 3980 mm | 5130 mm |
Vehicle Width | 1620 mm | 1830 mm |
Vehicle Height | 1380 mm | 1920 mm |
Wheelbase Size | 2460 mm | 3010 mm |
Fuel Tank Capacity | 50 L | 80 L |