1983 Audi 80 vs. 2008 Ford Bantam
To start off, 2008 Ford Bantam is newer by 25 year(s). Which means there will be less support and parts availability for 1983 Audi 80. In addition, the cost of maintenance, including insurance, on 1983 Audi 80 would be higher. At 1,780 cc (4 cylinders), 1983 Audi 80 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1983 Audi 80 weights approximately 20 kg more than 2008 Ford Bantam.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Audi 80 (147 Nm @ 3300 RPM) has 37 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1983 Audi 80 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.
Compare all specifications:
1983 Audi 80 | 2008 Ford Bantam | |
Make | Audi | Ford |
Model | 80 | Bantam |
Year Released | 1983 | 2008 |
Engine Position | Front | Front |
Engine Size | 1780 cc | 1297 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 90 HP | 0 HP |
Torque | 147 Nm | 110 Nm |
Torque RPM | 3300 RPM | 3000 RPM |
Engine Bore Size | 81 mm | 74 mm |
Engine Stroke Size | 86.4 mm | 75.5 mm |
Engine Compression Ratio | 10.0:1 | 10.2:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 980 kg | 960 kg |
Vehicle Length | 4390 mm | 4280 mm |
Vehicle Width | 1690 mm | 1470 mm |
Vehicle Height | 1380 mm | 1640 mm |
Wheelbase Size | 2550 mm | 2670 mm |
Fuel Tank Capacity | 67 L | 54 L |