1983 Bentley Mulsanne vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 27 year(s). Which means there will be less support and parts availability for 1983 Bentley Mulsanne. In addition, the cost of maintenance, including insurance, on 1983 Bentley Mulsanne would be higher. At 6,750 cc (8 cylinders), 1983 Bentley Mulsanne is equipped with a bigger engine. In terms of performance, 1983 Bentley Mulsanne (328 HP @ 4600 RPM) has 190 more horse power than 2010 Chrysler Sebring. (138 HP @ 4000 RPM). In normal driving conditions, 1983 Bentley Mulsanne should accelerate faster than 2010 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1983 Bentley Mulsanne weights approximately 615 kg more than 2010 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1983 Bentley Mulsanne is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1983 Bentley Mulsanne. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Bentley Mulsanne (610 Nm @ 2450 RPM) has 300 more torque (in Nm) than 2010 Chrysler Sebring. (310 Nm @ 1750 RPM). This means 1983 Bentley Mulsanne will have an easier job in driving up hills or pulling heavy equipment than 2010 Chrysler Sebring. 1983 Bentley Mulsanne has automatic transmission and 2010 Chrysler Sebring has manual transmission. 2010 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 Bentley Mulsanne will be easier to drive especially in heavy traffic.
Compare all specifications:
1983 Bentley Mulsanne | 2010 Chrysler Sebring | |
Make | Bentley | Chrysler |
Model | Mulsanne | Sebring |
Year Released | 1983 | 2010 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 6750 cc | 1967 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 328 HP | 138 HP |
Engine RPM | 4600 RPM | 4000 RPM |
Torque | 610 Nm | 310 Nm |
Torque RPM | 2450 RPM | 1750 RPM |
Engine Bore Size | 104.1 mm | 81 mm |
Engine Stroke Size | 99.1 mm | 95.5 mm |
Engine Compression Ratio | 8.0:1 | 18.5:1 |
Fuel Type | Gasoline | Diesel |
Top Speed | 217 km/hour | 203 km/hour |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 2250 kg | 1635 kg |
Vehicle Length | 5320 mm | 4860 mm |
Vehicle Width | 1900 mm | 1850 mm |
Vehicle Height | 1490 mm | 1500 mm |
Wheelbase Size | 3070 mm | 2770 mm |
Fuel Tank Capacity | 106 L | 63 L |