1983 BMW 525 vs. 1990 Fiat Tempra

To start off, 1990 Fiat Tempra is newer by 7 year(s). Which means there will be less support and parts availability for 1983 BMW 525. In addition, the cost of maintenance, including insurance, on 1983 BMW 525 would be higher. At 2,691 cc (6 cylinders), 1983 BMW 525 is equipped with a bigger engine. In terms of performance, 1983 BMW 525 (123 HP @ 4250 RPM) has 13 more horse power than 1990 Fiat Tempra. (110 HP @ 6000 RPM). In normal driving conditions, 1983 BMW 525 should accelerate faster than 1990 Fiat Tempra. With that said, vehicle weight also plays an important factor in acceleration. 1983 BMW 525 weights approximately 300 kg more than 1990 Fiat Tempra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1983 BMW 525 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1983 BMW 525. However, in wet, icy, snow, or gravel driving conditions, 1990 Fiat Tempra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 BMW 525 (240 Nm @ 3250 RPM) has 100 more torque (in Nm) than 1990 Fiat Tempra. (140 Nm @ 2500 RPM). This means 1983 BMW 525 will have an easier job in driving up hills or pulling heavy equipment than 1990 Fiat Tempra. 1983 BMW 525 has automatic transmission and 1990 Fiat Tempra has manual transmission. 1990 Fiat Tempra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1983 BMW 525 will be easier to drive especially in heavy traffic.

Compare all specifications:

1983 BMW 525 1990 Fiat Tempra
Make BMW Fiat
Model 525 Tempra
Year Released 1983 1990
Body Type Sedan Station Wagon
Engine Position Front Front
Engine Size 2691 cc 1756 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 123 HP 110 HP
Engine RPM 4250 RPM 6000 RPM
Torque 240 Nm 140 Nm
Torque RPM 3250 RPM 2500 RPM
Engine Bore Size 84 mm 84 mm
Engine Stroke Size 81 mm 79.2 mm
Engine Compression Ratio 11.0:1 9.5:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1500 kg 1200 kg
Vehicle Length 4630 mm 4470 mm
Vehicle Width 1710 mm 1710 mm
Vehicle Height 1430 mm 1450 mm
Wheelbase Size 2580 mm 2550 mm