1983 Daihatsu Charade vs. 1996 Rover 200
To start off, 1996 Rover 200 is newer by 13 year(s). Which means there will be less support and parts availability for 1983 Daihatsu Charade. In addition, the cost of maintenance, including insurance, on 1983 Daihatsu Charade would be higher. At 1,994 cc (4 cylinders), 1996 Rover 200 is equipped with a bigger engine. In terms of performance, 1996 Rover 200 (85 HP) has 18 more horse power than 1983 Daihatsu Charade. (67 HP) In normal driving conditions, 1996 Rover 200 should accelerate faster than 1983 Daihatsu Charade. With that said, vehicle weight also plays an important factor in acceleration. 1996 Rover 200 weights approximately 405 kg more than 1983 Daihatsu Charade. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Rover 200 (170 Nm @ 2000 RPM) has 64 more torque (in Nm) than 1983 Daihatsu Charade. (106 Nm @ 3200 RPM). This means 1996 Rover 200 will have an easier job in driving up hills or pulling heavy equipment than 1983 Daihatsu Charade.
Compare all specifications:
1983 Daihatsu Charade | 1996 Rover 200 | |
Make | Daihatsu | Rover |
Model | Charade | 200 |
Year Released | 1983 | 1996 |
Engine Position | Front | Front |
Engine Size | 993 cc | 1994 cc |
Engine Cylinders | 3 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 67 HP | 85 HP |
Torque | 106 Nm | 170 Nm |
Torque RPM | 3200 RPM | 2000 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | Front | Front |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 730 kg | 1135 kg |
Vehicle Length | 3560 mm | 3980 mm |
Vehicle Width | 1560 mm | 1700 mm |
Vehicle Height | 1410 mm | 1430 mm |
Wheelbase Size | 2330 mm | 2510 mm |