1983 Daihatsu Taft vs. 1962 MG MGA
To start off, 1983 Daihatsu Taft is newer by 21 year(s). Which means there will be less support and parts availability for 1962 MG MGA. In addition, the cost of maintenance, including insurance, on 1962 MG MGA would be higher. At 1,588 cc (4 cylinders), 1962 MG MGA is equipped with a bigger engine. In terms of performance, 1962 MG MGA (106 HP @ 6700 RPM) has 62 more horse power than 1983 Daihatsu Taft. (44 HP @ 5400 RPM) In normal driving conditions, 1962 MG MGA should accelerate faster than 1983 Daihatsu Taft. With that said, vehicle weight also plays an important factor in acceleration. 1983 Daihatsu Taft weights approximately 120 kg more than 1962 MG MGA.
Because 1983 Daihatsu Taft is four wheel drive (4WD), it will have significant more traction and grip than 1962 MG MGA. In wet, icy, snow, or gravel driving conditions, 1983 Daihatsu Taft will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1962 MG MGA (141 Nm @ 4500 RPM) has 78 more torque (in Nm) than 1983 Daihatsu Taft. (63 Nm @ 4200 RPM). This means 1962 MG MGA will have an easier job in driving up hills or pulling heavy equipment than 1983 Daihatsu Taft.
Compare all specifications:
| 1983 Daihatsu Taft | 1962 MG MGA | |
| Make | Daihatsu | MG |
| Model | Taft | MGA |
| Year Released | 1983 | 1962 |
| Engine Size | 958 cc | 1588 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 44 HP | 106 HP |
| Engine RPM | 5400 RPM | 6700 RPM |
| Torque | 63 Nm | 141 Nm |
| Torque RPM | 4200 RPM | 4500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | 4WD | Rear |
| Vehicle Weight | 1020 kg | 900 kg |
| Vehicle Length | 3370 mm | 3970 mm |
| Vehicle Width | 1470 mm | 1460 mm |
| Vehicle Height | 1830 mm | 1280 mm |
| Wheelbase Size | 2030 mm | 2390 mm |
