1983 Dodge Charger vs. 2011 Lancia Voyager

To start off, 2011 Lancia Voyager is newer by 28 year(s). Which means there will be less support and parts availability for 1983 Dodge Charger. In addition, the cost of maintenance, including insurance, on 1983 Dodge Charger would be higher. At 2,777 cc (4 cylinders), 2011 Lancia Voyager is equipped with a bigger engine. In terms of performance, 2011 Lancia Voyager (161 HP @ 3800 RPM) has 64 more horse power than 1983 Dodge Charger. (97 HP @ 5200 RPM) In normal driving conditions, 2011 Lancia Voyager should accelerate faster than 1983 Dodge Charger. With that said, vehicle weight also plays an important factor in acceleration. 2011 Lancia Voyager weights approximately 1040 kg more than 1983 Dodge Charger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Lancia Voyager (359 Nm @ 1600 RPM) has 198 more torque (in Nm) than 1983 Dodge Charger. (161 Nm @ 3200 RPM). This means 2011 Lancia Voyager will have an easier job in driving up hills or pulling heavy equipment than 1983 Dodge Charger.

Compare all specifications:

1983 Dodge Charger 2011 Lancia Voyager
Make Dodge Lancia
Model Charger Voyager
Year Released 1983 2011
Body Type Coupe Minivan
Engine Position Front Front
Engine Size 2213 cc 2777 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 97 HP 161 HP
Engine RPM 5200 RPM 3800 RPM
Torque 161 Nm 359 Nm
Torque RPM 3200 RPM 1600 RPM
Drive Type Front Front
Number of Seats 5 seats 7 seats
Number of Doors 2 doors 5 doors
Vehicle Weight 1070 kg 2110 kg
Vehicle Length 4430 mm 5151 mm
Vehicle Width 1700 mm 1999 mm
Vehicle Height 1300 mm 1725 mm
Wheelbase Size 2460 mm 3078 mm