1983 Fiat Panda vs. 2000 Kia Shuma
To start off, 2000 Kia Shuma is newer by 17 year(s). Which means there will be less support and parts availability for 1983 Fiat Panda. In addition, the cost of maintenance, including insurance, on 1983 Fiat Panda would be higher. At 1,498 cc (4 cylinders), 2000 Kia Shuma is equipped with a bigger engine. In terms of performance, 2000 Kia Shuma (87 HP @ 5000 RPM) has 53 more horse power than 1983 Fiat Panda. (34 HP @ 5600 RPM) In normal driving conditions, 2000 Kia Shuma should accelerate faster than 1983 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2000 Kia Shuma weights approximately 410 kg more than 1983 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Kia Shuma (135 Nm @ 4000 RPM) has 77 more torque (in Nm) than 1983 Fiat Panda. (58 Nm @ 3000 RPM). This means 2000 Kia Shuma will have an easier job in driving up hills or pulling heavy equipment than 1983 Fiat Panda.
Compare all specifications:
1983 Fiat Panda | 2000 Kia Shuma | |
Make | Fiat | Kia |
Model | Panda | Shuma |
Year Released | 1983 | 2000 |
Engine Position | Front | Front |
Engine Size | 843 cc | 1498 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 34 HP | 87 HP |
Engine RPM | 5600 RPM | 5000 RPM |
Torque | 58 Nm | 135 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 690 kg | 1100 kg |
Vehicle Length | 3420 mm | 4480 mm |
Vehicle Width | 1500 mm | 1720 mm |
Vehicle Height | 1430 mm | 1420 mm |
Wheelbase Size | 2170 mm | 2570 mm |