1983 Fiat Uno vs. 1968 Jensen FF
To start off, 1983 Fiat Uno is newer by 15 year(s). Which means there will be less support and parts availability for 1968 Jensen FF. In addition, the cost of maintenance, including insurance, on 1968 Jensen FF would be higher. At 6,276 cc (8 cylinders), 1968 Jensen FF is equipped with a bigger engine. In terms of performance, 1968 Jensen FF (279 HP @ 4600 RPM) has 235 more horse power than 1983 Fiat Uno. (44 HP @ 5000 RPM) In normal driving conditions, 1968 Jensen FF should accelerate faster than 1983 Fiat Uno. With that said, vehicle weight also plays an important factor in acceleration. 1968 Jensen FF weights approximately 1200 kg more than 1983 Fiat Uno. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1968 Jensen FF (587 Nm @ 2800 RPM) has 507 more torque (in Nm) than 1983 Fiat Uno. (80 Nm @ 2750 RPM). This means 1968 Jensen FF will have an easier job in driving up hills or pulling heavy equipment than 1983 Fiat Uno.
Compare all specifications:
| 1983 Fiat Uno | 1968 Jensen FF | |
| Make | Fiat | Jensen |
| Model | Uno | FF |
| Year Released | 1983 | 1968 |
| Engine Position | Front | Front |
| Engine Size | 999 cc | 6276 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 44 HP | 279 HP |
| Engine RPM | 5000 RPM | 4600 RPM |
| Torque | 80 Nm | 587 Nm |
| Torque RPM | 2750 RPM | 2800 RPM |
| Engine Bore Size | 70 mm | 108 mm |
| Engine Stroke Size | 64.9 mm | 85.9 mm |
| Engine Compression Ratio | 9.9:1 | 10.0:1 |
| Number of Seats | 5 seats | 4 seats |
| Vehicle Weight | 775 kg | 1975 kg |
| Vehicle Length | 3650 mm | 4860 mm |
| Vehicle Width | 1560 mm | 1760 mm |
| Vehicle Height | 1430 mm | 1360 mm |
| Wheelbase Size | 2370 mm | 2780 mm |
| Fuel Tank Capacity | 50 L | 72 L |
