1983 Holden Gemini vs. 1970 Holden Monaro

To start off, 1983 Holden Gemini is newer by 13 year(s). Which means there will be less support and parts availability for 1970 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1970 Holden Monaro would be higher. At 2,636 cc (6 cylinders), 1970 Holden Monaro is equipped with a bigger engine. In terms of performance, 1970 Holden Monaro (112 HP @ 4400 RPM) has 46 more horse power than 1983 Holden Gemini. (66 HP @ 5400 RPM) In normal driving conditions, 1970 Holden Monaro should accelerate faster than 1983 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1970 Holden Monaro weights approximately 360 kg more than 1983 Holden Gemini. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1970 Holden Monaro (213 Nm @ 2000 RPM) has 103 more torque (in Nm) than 1983 Holden Gemini. (110 Nm @ 3200 RPM). This means 1970 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1983 Holden Gemini.

Compare all specifications:

1983 Holden Gemini 1970 Holden Monaro
Make Holden Holden
Model Gemini Monaro
Year Released 1983 1970
Engine Position Front Front
Engine Size 1584 cc 2636 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 66 HP 112 HP
Engine RPM 5400 RPM 4400 RPM
Torque 110 Nm 213 Nm
Torque RPM 3200 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 955 kg 1315 kg
Vehicle Length 4250 mm 4700 mm
Vehicle Width 1580 mm 1840 mm
Vehicle Height 1340 mm 1400 mm
Wheelbase Size 2410 mm 2830 mm