1983 Holden Gemini vs. 2005 Lotus Exige
To start off, 2005 Lotus Exige is newer by 22 year(s). Which means there will be less support and parts availability for 1983 Holden Gemini. In addition, the cost of maintenance, including insurance, on 1983 Holden Gemini would be higher. At 1,796 cc (4 cylinders), 2005 Lotus Exige is equipped with a bigger engine. In terms of performance, 2005 Lotus Exige (189 HP @ 7800 RPM) has 123 more horse power than 1983 Holden Gemini. (66 HP @ 5400 RPM) In normal driving conditions, 2005 Lotus Exige should accelerate faster than 1983 Holden Gemini. With that said, vehicle weight also plays an important factor in acceleration. 1983 Holden Gemini weights approximately 80 kg more than 2005 Lotus Exige.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Lotus Exige (174 Nm @ 6800 RPM) has 64 more torque (in Nm) than 1983 Holden Gemini. (110 Nm @ 3200 RPM). This means 2005 Lotus Exige will have an easier job in driving up hills or pulling heavy equipment than 1983 Holden Gemini.
Compare all specifications:
1983 Holden Gemini | 2005 Lotus Exige | |
Make | Holden | Lotus |
Model | Gemini | Exige |
Year Released | 1983 | 2005 |
Engine Position | Front | Middle |
Engine Size | 1584 cc | 1796 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 66 HP | 189 HP |
Engine RPM | 5400 RPM | 7800 RPM |
Torque | 110 Nm | 174 Nm |
Torque RPM | 3200 RPM | 6800 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 955 kg | 875 kg |
Vehicle Length | 4250 mm | 3790 mm |
Vehicle Width | 1580 mm | 1730 mm |
Vehicle Height | 1340 mm | 1120 mm |
Wheelbase Size | 2410 mm | 2310 mm |