1983 Porsche 930 vs. 1981 Porsche 928

To start off, 1983 Porsche 930 is newer by 2 year(s). Which means there will be less support and parts availability for 1981 Porsche 928. In addition, the cost of maintenance, including insurance, on 1981 Porsche 928 would be higher. At 4,472 cc (8 cylinders), 1981 Porsche 928 is equipped with a bigger engine. In terms of performance, 1983 Porsche 930 (296 HP @ 5500 RPM) has 58 more horse power than 1981 Porsche 928. (238 HP @ 5250 RPM). In normal driving conditions, 1983 Porsche 930 should accelerate faster than 1981 Porsche 928. With that said, vehicle weight also plays an important factor in acceleration. 1981 Porsche 928 weights approximately 150 kg more than 1983 Porsche 930.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Porsche 930 (431 Nm @ 4000 RPM) has 75 more torque (in Nm) than 1981 Porsche 928. (356 Nm @ 3600 RPM). This means 1983 Porsche 930 will have an easier job in driving up hills or pulling heavy equipment than 1981 Porsche 928.

Compare all specifications:

1983 Porsche 930 1981 Porsche 928
Make Porsche Porsche
Model 930 928
Year Released 1983 1981
Body Type Coupe Coupe
Engine Position Rear Front
Engine Size 3299 cc 4472 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type boxer V
Valves per Cylinder 2 valves 2 valves
Horse Power 296 HP 238 HP
Engine RPM 5500 RPM 5250 RPM
Torque 431 Nm 356 Nm
Torque RPM 4000 RPM 3600 RPM
Engine Compression Ratio 7.0:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1300 kg 1450 kg
Vehicle Length 4300 mm 4450 mm
Vehicle Width 1780 mm 1840 mm
Vehicle Height 1320 mm 1320 mm
Wheelbase Size 2510 mm 2510 mm