1984 Audi Coupe vs. 2012 Hyundai ix20

To start off, 2012 Hyundai ix20 is newer by 28 year(s). Which means there will be less support and parts availability for 1984 Audi Coupe. In addition, the cost of maintenance, including insurance, on 1984 Audi Coupe would be higher. At 1,994 cc (5 cylinders), 1984 Audi Coupe is equipped with a bigger engine. In terms of performance, 1984 Audi Coupe (114 HP @ 5400 RPM) has 1 more horse power than 2012 Hyundai ix20. (113 HP @ 4000 RPM). In normal driving conditions, 1984 Audi Coupe should accelerate faster than 2012 Hyundai ix20. With that said, vehicle weight also plays an important factor in acceleration. 2012 Hyundai ix20 weights approximately 340 kg more than 1984 Audi Coupe.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Hyundai ix20 (260 Nm @ 2750 RPM) has 92 more torque (in Nm) than 1984 Audi Coupe. (168 Nm @ 3200 RPM). This means 2012 Hyundai ix20 will have an easier job in driving up hills or pulling heavy equipment than 1984 Audi Coupe.

Compare all specifications:

1984 Audi Coupe 2012 Hyundai ix20
Make Audi Hyundai
Model Coupe ix20
Year Released 1984 2012
Body Type Coupe Minivan
Engine Position Front Front
Engine Size 1994 cc 1582 cc
Engine Cylinders 5 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 114 HP 113 HP
Engine RPM 5400 RPM 4000 RPM
Torque 168 Nm 260 Nm
Torque RPM 3200 RPM 2750 RPM
Engine Bore Size 81 mm 77.2 mm
Engine Stroke Size 77.4 mm 84.5 mm
Engine Compression Ratio 10.0:1 17.3:1
Fuel Type Gasoline Diesel
Top Speed 187 km/hour 182 km/hour
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 3 doors 5 doors
Vehicle Weight 1040 kg 1380 kg
Vehicle Length 4360 mm 4100 mm
Vehicle Width 1690 mm 1765 mm
Vehicle Height 1360 mm 1600 mm
Wheelbase Size 2550 mm 2615 mm