1984 Bitter SC vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 24 year(s). Which means there will be less support and parts availability for 1984 Bitter SC. In addition, the cost of maintenance, including insurance, on 1984 Bitter SC would be higher. At 3,849 cc (6 cylinders), 1984 Bitter SC is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1984 Bitter SC weights approximately 409 kg more than 2008 Mazda 3.

Because 1984 Bitter SC is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1984 Bitter SC. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1984 Bitter SC (312 Nm @ 3400 RPM) has 166 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1984 Bitter SC will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

1984 Bitter SC 2008 Mazda 3
Make Bitter Mazda
Model SC 3
Year Released 1984 2008
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 3849 cc 1598 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 207 HP 0 HP
Torque 312 Nm 146 Nm
Torque RPM 3400 RPM 4000 RPM
Engine Bore Size 95 mm 78 mm
Engine Stroke Size 90.5 mm 83.6 mm
Fuel Type Gasoline Gasoline
Acceleration 0-100mph 8.6 seconds 11.3 seconds
Drive Type Rear Front
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1600 kg 1191 kg
Vehicle Length 4920 mm 4500 mm
Vehicle Width 1830 mm 1760 mm
Vehicle Height 1330 mm 1470 mm
Wheelbase Size 2690 mm 2650 mm