1984 Lancia Beta vs. 2013 Cadillac CTS

To start off, 2013 Cadillac CTS is newer by 29 year(s). Which means there will be less support and parts availability for 1984 Lancia Beta. In addition, the cost of maintenance, including insurance, on 1984 Lancia Beta would be higher. At 3,600 cc (6 cylinders), 2013 Cadillac CTS is equipped with a bigger engine. In terms of performance, 2013 Cadillac CTS (314 HP @ 6800 RPM) has 232 more horse power than 1984 Lancia Beta. (82 HP @ 5800 RPM) In normal driving conditions, 2013 Cadillac CTS should accelerate faster than 1984 Lancia Beta. With that said, vehicle weight also plays an important factor in acceleration. 2013 Cadillac CTS weights approximately 778 kg more than 1984 Lancia Beta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Cadillac CTS is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Cadillac CTS. However, in wet, icy, snow, or gravel driving conditions, 1984 Lancia Beta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Cadillac CTS (373 Nm @ 4900 RPM) has 262 more torque (in Nm) than 1984 Lancia Beta. (111 Nm @ 3200 RPM). This means 2013 Cadillac CTS will have an easier job in driving up hills or pulling heavy equipment than 1984 Lancia Beta. 2013 Cadillac CTS has automatic transmission and 1984 Lancia Beta has manual transmission. 1984 Lancia Beta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Cadillac CTS will be easier to drive especially in heavy traffic.

Compare all specifications:

1984 Lancia Beta 2013 Cadillac CTS
Make Lancia Cadillac
Model Beta CTS
Year Released 1984 2013
Body Type Coupe Sedan
Engine Position Front Front
Engine Size 1366 cc 3600 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 82 HP 314 HP
Engine RPM 5800 RPM 6800 RPM
Torque 111 Nm 373 Nm
Torque RPM 3200 RPM 4900 RPM
Engine Bore Size 76 mm 94 mm
Engine Stroke Size 71.5 mm 86 mm
Engine Compression Ratio 8.9:1 11.3
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual 6-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1000 kg 1778 kg
Vehicle Length 4000 mm 4859 mm
Vehicle Width 1660 mm 1842 mm
Vehicle Height 1290 mm 1473 mm
Wheelbase Size 2360 mm 2880 mm
Fuel Tank Capacity 45 L 68 L