1984 Peugeot 504 vs. 1978 Datsun 260Z
To start off, 1984 Peugeot 504 is newer by 6 year(s). Which means there will be less support and parts availability for 1978 Datsun 260Z. In addition, the cost of maintenance, including insurance, on 1978 Datsun 260Z would be higher. At 2,565 cc (6 cylinders), 1978 Datsun 260Z is equipped with a bigger engine. In terms of performance, 1978 Datsun 260Z (163 HP @ 5600 RPM) has 63 more horse power than 1984 Peugeot 504. (100 HP @ 5000 RPM) In normal driving conditions, 1978 Datsun 260Z should accelerate faster than 1984 Peugeot 504. With that said, vehicle weight also plays an important factor in acceleration. 1984 Peugeot 504 weights approximately 70 kg more than 1978 Datsun 260Z.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. 1978 Datsun 260Z has automatic transmission and 1984 Peugeot 504 has manual transmission. 1984 Peugeot 504 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1978 Datsun 260Z will be easier to drive especially in heavy traffic.
Compare all specifications:
1984 Peugeot 504 | 1978 Datsun 260Z | |
Make | Peugeot | Datsun |
Model | 504 | 260Z |
Year Released | 1984 | 1978 |
Engine Position | Front | Front |
Engine Size | 1970 cc | 2565 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 100 HP | 163 HP |
Engine RPM | 5000 RPM | 5600 RPM |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1170 kg | 1100 kg |
Vehicle Length | 4610 mm | 4135 mm |
Vehicle Width | 1700 mm | 1630 mm |
Vehicle Height | 1470 mm | 1290 mm |
Wheelbase Size | 2750 mm | 2310 mm |