1985 Abarth Lancia 037 vs. 1974 Humber Sceptre
To start off, 1985 Abarth Lancia 037 is newer by 11 year(s). Which means there will be less support and parts availability for 1974 Humber Sceptre. In addition, the cost of maintenance, including insurance, on 1974 Humber Sceptre would be higher. At 1,995 cc (4 cylinders), 1985 Abarth Lancia 037 is equipped with a bigger engine. In terms of performance, 1985 Abarth Lancia 037 (346 HP @ 8000 RPM) has 267 more horse power than 1974 Humber Sceptre. (79 HP @ 5200 RPM). In normal driving conditions, 1985 Abarth Lancia 037 should accelerate faster than 1974 Humber Sceptre. With that said, vehicle weight also plays an important factor in acceleration. 1974 Humber Sceptre weights approximately 32 kg more than 1985 Abarth Lancia 037.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Abarth Lancia 037 (300 Nm @ 5000 RPM) has 177 more torque (in Nm) than 1974 Humber Sceptre. (123 Nm @ 3600 RPM). This means 1985 Abarth Lancia 037 will have an easier job in driving up hills or pulling heavy equipment than 1974 Humber Sceptre.
Compare all specifications:
1985 Abarth Lancia 037 | 1974 Humber Sceptre | |
Make | Abarth | Humber |
Model | Lancia 037 | Sceptre |
Year Released | 1985 | 1974 |
Engine Size | 1995 cc | 1725 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 346 HP | 79 HP |
Engine RPM | 8000 RPM | 5200 RPM |
Torque | 300 Nm | 123 Nm |
Torque RPM | 5000 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Vehicle Weight | 960 kg | 992 kg |
Vehicle Length | 3920 mm | 4310 mm |
Vehicle Width | 1860 mm | 1620 mm |
Vehicle Height | 1250 mm | 1430 mm |
Wheelbase Size | 2450 mm | 2510 mm |