1985 Abarth Lancia 037 vs. 1980 Subaru Rex

To start off, 1985 Abarth Lancia 037 is newer by 5 year(s). Which means there will be less support and parts availability for 1980 Subaru Rex. In addition, the cost of maintenance, including insurance, on 1980 Subaru Rex would be higher. At 1,995 cc (4 cylinders), 1985 Abarth Lancia 037 is equipped with a bigger engine. In terms of performance, 1985 Abarth Lancia 037 (346 HP @ 8000 RPM) has 317 more horse power than 1980 Subaru Rex. (29 HP @ 6200 RPM). In normal driving conditions, 1985 Abarth Lancia 037 should accelerate faster than 1980 Subaru Rex. With that said, vehicle weight also plays an important factor in acceleration. 1985 Abarth Lancia 037 weights approximately 425 kg more than 1980 Subaru Rex. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Abarth Lancia 037 (300 Nm @ 5000 RPM) has 257 more torque (in Nm) than 1980 Subaru Rex. (43 Nm @ 3500 RPM). This means 1985 Abarth Lancia 037 will have an easier job in driving up hills or pulling heavy equipment than 1980 Subaru Rex.

Compare all specifications:

1985 Abarth Lancia 037 1980 Subaru Rex
Make Abarth Subaru
Model Lancia 037 Rex
Year Released 1985 1980
Engine Size 1995 cc 544 cc
Engine Cylinders 4 cylinders 2 cylinders
Engine Type in-line in-line
Horse Power 346 HP 29 HP
Engine RPM 8000 RPM 6200 RPM
Torque 300 Nm 43 Nm
Torque RPM 5000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 960 kg 535 kg
Vehicle Length 3920 mm 3000 mm
Vehicle Width 1860 mm 1300 mm
Vehicle Height 1250 mm 1290 mm
Wheelbase Size 2450 mm 1930 mm