1985 Audi 200 vs. 1963 BMW 502
To start off, 1985 Audi 200 is newer by 22 year(s). Which means there will be less support and parts availability for 1963 BMW 502. In addition, the cost of maintenance, including insurance, on 1963 BMW 502 would be higher. At 3,168 cc (8 cylinders), 1963 BMW 502 is equipped with a bigger engine. In terms of performance, 1985 Audi 200 (200 HP) has 42 more horse power than 1963 BMW 502. (158 HP). In normal driving conditions, 1985 Audi 200 should accelerate faster than 1963 BMW 502. With that said, vehicle weight also plays an important factor in acceleration. 1963 BMW 502 weights approximately 200 kg more than 1985 Audi 200.
Because 1985 Audi 200 is four wheel drive (4WD), it will have significant more traction and grip than 1963 BMW 502. In wet, icy, snow, or gravel driving conditions, 1985 Audi 200 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Audi 200 (258 Nm) has 18 more torque (in Nm) than 1963 BMW 502. (240 Nm). This means 1985 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 1963 BMW 502.
Compare all specifications:
| 1985 Audi 200 | 1963 BMW 502 | |
| Make | Audi | BMW |
| Model | 200 | 502 |
| Year Released | 1985 | 1963 |
| Engine Position | Front | Front |
| Engine Size | 2144 cc | 3168 cc |
| Engine Cylinders | 5 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 200 HP | 158 HP |
| Torque | 258 Nm | 240 Nm |
| Engine Bore Size | 79.5 mm | 82.1 mm |
| Engine Stroke Size | 86.4 mm | 75 mm |
| Engine Compression Ratio | 8.8:1 | 9.0:1 |
| Drive Type | 4WD | Rear |
| Number of Seats | 4 seats | 4 seats |
| Vehicle Weight | 1290 kg | 1490 kg |
| Vehicle Length | 4810 mm | 4740 mm |
| Vehicle Width | 1820 mm | 1790 mm |
| Vehicle Height | 1430 mm | 1540 mm |
| Wheelbase Size | 2690 mm | 2840 mm |
