1985 Audi 200 vs. 2010 Alpina B3

To start off, 2010 Alpina B3 is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Audi 200. In addition, the cost of maintenance, including insurance, on 1985 Audi 200 would be higher. At 3,000 cc (6 cylinders), 2010 Alpina B3 is equipped with a bigger engine. In terms of performance, 2010 Alpina B3 (355 HP) has 155 more horse power than 1985 Audi 200. (200 HP) In normal driving conditions, 2010 Alpina B3 should accelerate faster than 1985 Audi 200. With that said, vehicle weight also plays an important factor in acceleration. 2010 Alpina B3 weights approximately 270 kg more than 1985 Audi 200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alpina B3 (500 Nm) has 242 more torque (in Nm) than 1985 Audi 200. (258 Nm). This means 2010 Alpina B3 will have an easier job in driving up hills or pulling heavy equipment than 1985 Audi 200. 2010 Alpina B3 has automatic transmission and 1985 Audi 200 has manual transmission. 1985 Audi 200 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Alpina B3 will be easier to drive especially in heavy traffic.

Compare all specifications: