1985 Audi 200 vs. 2010 BMW 325
To start off, 2010 BMW 325 is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Audi 200. In addition, the cost of maintenance, including insurance, on 1985 Audi 200 would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 1985 Audi 200 (200 HP) has 10 more horse power than 2010 BMW 325. (190 HP). In normal driving conditions, 1985 Audi 200 should accelerate faster than 2010 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 190 kg more than 1985 Audi 200.
Because 1985 Audi 200 is four wheel drive (4WD), it will have significant more traction and grip than 2010 BMW 325. In wet, icy, snow, or gravel driving conditions, 1985 Audi 200 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Audi 200 (258 Nm) has 13 more torque (in Nm) than 2010 BMW 325. (245 Nm). This means 1985 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 2010 BMW 325.
Compare all specifications:
1985 Audi 200 | 2010 BMW 325 | |
Make | Audi | BMW |
Model | 200 | 325 |
Year Released | 1985 | 2010 |
Engine Position | Front | Front |
Engine Size | 2144 cc | 2494 cc |
Engine Cylinders | 5 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 200 HP | 190 HP |
Torque | 258 Nm | 245 Nm |
Engine Bore Size | 79.5 mm | 84 mm |
Engine Stroke Size | 86.4 mm | 75 mm |
Engine Compression Ratio | 8.8:1 | 11.0:1 |
Top Speed | 230 km/hour | 235 km/hour |
Drive Type | 4WD | Rear |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1290 kg | 1480 kg |
Vehicle Length | 4810 mm | 4270 mm |
Vehicle Width | 1820 mm | 1760 mm |
Vehicle Height | 1430 mm | 1410 mm |
Wheelbase Size | 2690 mm | 2730 mm |