1985 Audi 200 vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Audi 200. In addition, the cost of maintenance, including insurance, on 1985 Audi 200 would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (215 HP) has 15 more horse power than 1985 Audi 200. (200 HP) In normal driving conditions, 2010 BMW 325 should accelerate faster than 1985 Audi 200. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 325 kg more than 1985 Audi 200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (270 Nm) has 12 more torque (in Nm) than 1985 Audi 200. (258 Nm). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 1985 Audi 200.

Compare all specifications:

1985 Audi 200 2010 BMW 325
Make Audi BMW
Model 200 325
Year Released 1985 2010
Engine Position Front Front
Engine Size 2144 cc 2494 cc
Engine Cylinders 5 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 200 HP 215 HP
Torque 258 Nm 270 Nm
Engine Bore Size 79.5 mm 85 mm
Engine Stroke Size 86.4 mm 88 mm
Engine Compression Ratio 8.8:1 12.0:1
Top Speed 230 km/hour 244 km/hour
Drive Type 4WD 4WD
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 1290 kg 1615 kg
Vehicle Length 4810 mm 4530 mm
Vehicle Width 1820 mm 1820 mm
Vehicle Height 1430 mm 1430 mm
Wheelbase Size 2690 mm 2770 mm