1985 Citroen CX vs. 1972 Mitsubishi Minica
To start off, 1985 Citroen CX is newer by 13 year(s). Which means there will be less support and parts availability for 1972 Mitsubishi Minica. In addition, the cost of maintenance, including insurance, on 1972 Mitsubishi Minica would be higher. At 2,499 cc (4 cylinders), 1985 Citroen CX is equipped with a bigger engine. In terms of performance, 1985 Citroen CX (137 HP @ 5000 RPM) has 104 more horse power than 1972 Mitsubishi Minica. (33 HP @ 7000 RPM). In normal driving conditions, 1985 Citroen CX should accelerate faster than 1972 Mitsubishi Minica.
Because 1972 Mitsubishi Minica is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Mitsubishi Minica. However, in wet, icy, snow, or gravel driving conditions, 1985 Citroen CX, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Citroen CX (206 Nm @ 4000 RPM) has 167 more torque (in Nm) than 1972 Mitsubishi Minica. (39 Nm @ 6500 RPM). This means 1985 Citroen CX will have an easier job in driving up hills or pulling heavy equipment than 1972 Mitsubishi Minica.
Compare all specifications:
1985 Citroen CX | 1972 Mitsubishi Minica | |
Make | Citroen | Mitsubishi |
Model | CX | Minica |
Year Released | 1985 | 1972 |
Engine Position | Front | Front |
Engine Size | 2499 cc | 359 cc |
Engine Cylinders | 4 cylinders | 2 cylinders |
Engine Type | in-line | in-line |
Horse Power | 137 HP | 33 HP |
Engine RPM | 5000 RPM | 7000 RPM |
Torque | 206 Nm | 39 Nm |
Torque RPM | 4000 RPM | 6500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Vehicle Length | 4930 mm | 3010 mm |
Vehicle Width | 1770 mm | 1310 mm |
Vehicle Height | 1470 mm | 1290 mm |
Wheelbase Size | 3100 mm | 2010 mm |