1985 Dodge Conquest vs. 1988 Pontiac Fiero
To start off, 1988 Pontiac Fiero is newer by 3 year(s). Which means there will be less support and parts availability for 1985 Dodge Conquest. In addition, the cost of maintenance, including insurance, on 1985 Dodge Conquest would be higher. At 2,826 cc (6 cylinders), 1988 Pontiac Fiero is equipped with a bigger engine. In terms of performance, both vehicles can yield 143 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1985 Dodge Conquest weights approximately 30 kg more than 1988 Pontiac Fiero.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Dodge Conquest (251 Nm) has 31 more torque (in Nm) than 1988 Pontiac Fiero. (220 Nm). This means 1985 Dodge Conquest will have an easier job in driving up hills or pulling heavy equipment than 1988 Pontiac Fiero.
Compare all specifications:
1985 Dodge Conquest | 1988 Pontiac Fiero | |
Make | Dodge | Pontiac |
Model | Conquest | Fiero |
Year Released | 1985 | 1988 |
Engine Position | Front | Middle |
Engine Size | 2555 cc | 2826 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 143 HP | 143 HP |
Engine RPM | 5000 RPM | 4500 RPM |
Torque | 251 Nm | 220 Nm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 2 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1280 kg | 1250 kg |
Vehicle Length | 4410 mm | 4190 mm |
Vehicle Width | 1690 mm | 1760 mm |
Vehicle Height | 1320 mm | 1200 mm |
Wheelbase Size | 2450 mm | 2380 mm |