1985 Ford Crown Victoria vs. 1968 Lancia Fulvia
To start off, 1985 Ford Crown Victoria is newer by 17 year(s). Which means there will be less support and parts availability for 1968 Lancia Fulvia. In addition, the cost of maintenance, including insurance, on 1968 Lancia Fulvia would be higher. At 4,942 cc (8 cylinders), 1985 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 1985 Ford Crown Victoria (148 HP @ 3200 RPM) has 36 more horse power than 1968 Lancia Fulvia. (112 HP @ 6000 RPM). In normal driving conditions, 1985 Ford Crown Victoria should accelerate faster than 1968 Lancia Fulvia. With that said, vehicle weight also plays an important factor in acceleration. 1985 Ford Crown Victoria weights approximately 700 kg more than 1968 Lancia Fulvia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1985 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1968 Lancia Fulvia, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Ford Crown Victoria (366 Nm @ 2000 RPM) has 212 more torque (in Nm) than 1968 Lancia Fulvia. (154 Nm @ 4500 RPM). This means 1985 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1968 Lancia Fulvia. 1985 Ford Crown Victoria has automatic transmission and 1968 Lancia Fulvia has manual transmission. 1968 Lancia Fulvia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1985 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1985 Ford Crown Victoria | 1968 Lancia Fulvia | |
Make | Ford | Lancia |
Model | Crown Victoria | Fulvia |
Year Released | 1985 | 1968 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 4942 cc | 1584 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 148 HP | 112 HP |
Engine RPM | 3200 RPM | 6000 RPM |
Torque | 366 Nm | 154 Nm |
Torque RPM | 2000 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1700 kg | 1000 kg |
Vehicle Length | 5320 mm | 3990 mm |
Vehicle Width | 1980 mm | 1570 mm |
Vehicle Height | 1390 mm | 1330 mm |
Wheelbase Size | 2910 mm | 2340 mm |