1985 Ford Laser vs. 1961 Volvo 120
To start off, 1985 Ford Laser is newer by 24 year(s). Which means there will be less support and parts availability for 1961 Volvo 120. In addition, the cost of maintenance, including insurance, on 1961 Volvo 120 would be higher. At 1,597 cc (4 cylinders), 1985 Ford Laser is equipped with a bigger engine. In terms of performance, 1985 Ford Laser (71 HP) has 12 more horse power than 1961 Volvo 120. (59 HP). In normal driving conditions, 1985 Ford Laser should accelerate faster than 1961 Volvo 120. With that said, vehicle weight also plays an important factor in acceleration. 1961 Volvo 120 weights approximately 173 kg more than 1985 Ford Laser.
Because 1961 Volvo 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Volvo 120. However, in wet, icy, snow, or gravel driving conditions, 1985 Ford Laser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Ford Laser (121 Nm @ 3000 RPM) has 6 more torque (in Nm) than 1961 Volvo 120. (115 Nm @ 2500 RPM). This means 1985 Ford Laser will have an easier job in driving up hills or pulling heavy equipment than 1961 Volvo 120.
Compare all specifications:
1985 Ford Laser | 1961 Volvo 120 | |
Make | Ford | Volvo |
Model | Laser | 120 |
Year Released | 1985 | 1961 |
Engine Position | Front | Front |
Engine Size | 1597 cc | 1582 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 71 HP | 59 HP |
Torque | 121 Nm | 115 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Vehicle Weight | 822 kg | 995 kg |
Vehicle Length | 4000 mm | 4460 mm |
Vehicle Width | 1660 mm | 1620 mm |
Vehicle Height | 1400 mm | 1510 mm |
Wheelbase Size | 2410 mm | 2610 mm |