1985 Hyundai Pony vs. 1986 Toyota Camry
To start off, 1986 Toyota Camry is newer by 1 year(s). Which means there will be less support and parts availability for 1985 Hyundai Pony. In addition, the cost of maintenance, including insurance, on 1985 Hyundai Pony would be higher. At 1,988 cc (4 cylinders), 1986 Toyota Camry is equipped with a bigger engine. In terms of performance, 1986 Toyota Camry (85 HP) has 19 more horse power than 1985 Hyundai Pony. (66 HP) In normal driving conditions, 1986 Toyota Camry should accelerate faster than 1985 Hyundai Pony. With that said, vehicle weight also plays an important factor in acceleration. 1986 Toyota Camry weights approximately 450 kg more than 1985 Hyundai Pony. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Toyota Camry (166 Nm @ 2400 RPM) has 70 more torque (in Nm) than 1985 Hyundai Pony. (96 Nm @ 3500 RPM). This means 1986 Toyota Camry will have an easier job in driving up hills or pulling heavy equipment than 1985 Hyundai Pony.
Compare all specifications:
1985 Hyundai Pony | 1986 Toyota Camry | |
Make | Hyundai | Toyota |
Model | Pony | Camry |
Year Released | 1985 | 1986 |
Engine Position | Front | Front |
Engine Size | 1298 cc | 1988 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 66 HP | 85 HP |
Torque | 96 Nm | 166 Nm |
Torque RPM | 3500 RPM | 2400 RPM |
Engine Compression Ratio | 9.8:1 | 23.0:1 |
Drive Type | Front | Front |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 890 kg | 1340 kg |
Vehicle Length | 3990 mm | 4620 mm |
Vehicle Width | 1600 mm | 1720 mm |
Vehicle Height | 1390 mm | 1410 mm |
Wheelbase Size | 2390 mm | 2610 mm |