1985 Hyundai Pony vs. 2005 MG ZT-T

To start off, 2005 MG ZT-T is newer by 20 year(s). Which means there will be less support and parts availability for 1985 Hyundai Pony. In addition, the cost of maintenance, including insurance, on 1985 Hyundai Pony would be higher. At 2,495 cc (6 cylinders), 2005 MG ZT-T is equipped with a bigger engine. In terms of performance, 2005 MG ZT-T (187 HP) has 121 more horse power than 1985 Hyundai Pony. (66 HP) In normal driving conditions, 2005 MG ZT-T should accelerate faster than 1985 Hyundai Pony. With that said, vehicle weight also plays an important factor in acceleration. 2005 MG ZT-T weights approximately 735 kg more than 1985 Hyundai Pony. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 MG ZT-T (250 Nm @ 4000 RPM) has 154 more torque (in Nm) than 1985 Hyundai Pony. (96 Nm @ 3500 RPM). This means 2005 MG ZT-T will have an easier job in driving up hills or pulling heavy equipment than 1985 Hyundai Pony.

Compare all specifications:

1985 Hyundai Pony 2005 MG ZT-T
Make Hyundai MG
Model Pony ZT-T
Year Released 1985 2005
Engine Position Front Front
Engine Size 1298 cc 2495 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 66 HP 187 HP
Torque 96 Nm 250 Nm
Torque RPM 3500 RPM 4000 RPM
Engine Bore Size 71 mm 80 mm
Engine Stroke Size 82 mm 82.8 mm
Engine Compression Ratio 9.8:1 10.3:1
Top Speed 153 km/hour 220 km/hour
Acceleration 0-100mph 13 seconds 8.7 seconds
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 890 kg 1625 kg
Vehicle Length 3990 mm 4800 mm
Vehicle Width 1600 mm 1780 mm
Vehicle Height 1390 mm 1430 mm
Wheelbase Size 2390 mm 2830 mm