1985 Hyundai Pony vs. 2013 Honda Accord

To start off, 2013 Honda Accord is newer by 28 year(s). Which means there will be less support and parts availability for 1985 Hyundai Pony. In addition, the cost of maintenance, including insurance, on 1985 Hyundai Pony would be higher. At 2,356 cc (4 cylinders), 2013 Honda Accord is equipped with a bigger engine. In terms of performance, 2013 Honda Accord (182 HP) has 116 more horse power than 1985 Hyundai Pony. (66 HP) In normal driving conditions, 2013 Honda Accord should accelerate faster than 1985 Hyundai Pony. With that said, vehicle weight also plays an important factor in acceleration. 2013 Honda Accord weights approximately 576 kg more than 1985 Hyundai Pony. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Honda Accord (245 Nm @ 3900 RPM) has 149 more torque (in Nm) than 1985 Hyundai Pony. (96 Nm @ 3500 RPM). This means 2013 Honda Accord will have an easier job in driving up hills or pulling heavy equipment than 1985 Hyundai Pony.

Compare all specifications:

1985 Hyundai Pony 2013 Honda Accord
Make Hyundai Honda
Model Pony Accord
Year Released 1985 2013
Engine Position Front Front
Engine Size 1298 cc 2356 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 66 HP 182 HP
Torque 96 Nm 245 Nm
Torque RPM 3500 RPM 3900 RPM
Engine Bore Size 71 mm 87 mm
Engine Stroke Size 82 mm 99 mm
Engine Compression Ratio 9.8:1 11.0 : 1
Drive Type Front Front
Transmission Type Manual 6-speed manual
Number of Seats 5 seats 5 seats
Vehicle Weight 890 kg 1466 kg
Vehicle Length 3990 mm 4862 mm
Vehicle Width 1600 mm 1849 mm
Vehicle Height 1390 mm 1465 mm
Wheelbase Size 2390 mm 2775 mm