1985 Lincoln Mark VII vs. 1980 Toyota Corolla

To start off, 1985 Lincoln Mark VII is newer by 5 year(s). Which means there will be less support and parts availability for 1980 Toyota Corolla. In addition, the cost of maintenance, including insurance, on 1980 Toyota Corolla would be higher. At 4,942 cc (8 cylinders), 1985 Lincoln Mark VII is equipped with a bigger engine. In terms of performance, 1985 Lincoln Mark VII (138 HP) has 79 more horse power than 1980 Toyota Corolla. (59 HP). In normal driving conditions, 1985 Lincoln Mark VII should accelerate faster than 1980 Toyota Corolla. With that said, vehicle weight also plays an important factor in acceleration. 1985 Lincoln Mark VII weights approximately 801 kg more than 1980 Toyota Corolla. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Lincoln Mark VII (346 Nm @ 1800 RPM) has 252 more torque (in Nm) than 1980 Toyota Corolla. (94 Nm @ 3600 RPM). This means 1985 Lincoln Mark VII will have an easier job in driving up hills or pulling heavy equipment than 1980 Toyota Corolla.

Compare all specifications:

1985 Lincoln Mark VII 1980 Toyota Corolla
Make Lincoln Toyota
Model Mark VII Corolla
Year Released 1985 1980
Engine Position Front Front
Engine Size 4942 cc 1290 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 138 HP 59 HP
Torque 346 Nm 94 Nm
Torque RPM 1800 RPM 3600 RPM
Drive Type Rear Rear
Number of Seats 5 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1656 kg 855 kg
Vehicle Length 5160 mm 4060 mm
Vehicle Width 1810 mm 1620 mm
Vehicle Height 1380 mm 1400 mm
Wheelbase Size 2760 mm 2410 mm