1985 Mercedes-Benz 200 vs. 2010 Lancia Ypsilon
To start off, 2010 Lancia Ypsilon is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Mercedes-Benz 200. In addition, the cost of maintenance, including insurance, on 1985 Mercedes-Benz 200 would be higher. At 1,997 cc (4 cylinders), 1985 Mercedes-Benz 200 is equipped with a bigger engine. In terms of performance, 1985 Mercedes-Benz 200 (122 HP @ 5100 RPM) has 28 more horse power than 2010 Lancia Ypsilon. (94 HP @ 5800 RPM). In normal driving conditions, 1985 Mercedes-Benz 200 should accelerate faster than 2010 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1985 Mercedes-Benz 200 weights approximately 335 kg more than 2010 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Mercedes-Benz 200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1985 Mercedes-Benz 200. However, in wet, icy, snow, or gravel driving conditions, 2010 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Mercedes-Benz 200 (178 Nm @ 3500 RPM) has 50 more torque (in Nm) than 2010 Lancia Ypsilon. (128 Nm @ 4500 RPM). This means 1985 Mercedes-Benz 200 will have an easier job in driving up hills or pulling heavy equipment than 2010 Lancia Ypsilon. 1985 Mercedes-Benz 200 has automatic transmission and 2010 Lancia Ypsilon has manual transmission. 2010 Lancia Ypsilon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1985 Mercedes-Benz 200 will be easier to drive especially in heavy traffic.
Compare all specifications:
1985 Mercedes-Benz 200 | 2010 Lancia Ypsilon | |
Make | Mercedes-Benz | Lancia |
Model | 200 | Ypsilon |
Year Released | 1985 | 2010 |
Engine Position | Front | Front |
Engine Size | 1997 cc | 1368 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 122 HP | 94 HP |
Engine RPM | 5100 RPM | 5800 RPM |
Torque | 178 Nm | 128 Nm |
Torque RPM | 3500 RPM | 4500 RPM |
Engine Bore Size | 89.1 mm | 72 mm |
Engine Stroke Size | 80.3 mm | 84 mm |
Engine Compression Ratio | 9.1:1 | 11.0:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1390 kg | 1055 kg |
Vehicle Length | 4750 mm | 3820 mm |
Vehicle Width | 1750 mm | 1710 mm |
Vehicle Height | 1450 mm | 1540 mm |
Wheelbase Size | 2810 mm | 2390 mm |
Fuel Tank Capacity | 70 L | 47 L |