1985 Mercedes-Benz 250 vs. 1980 Simca 1309
To start off, 1985 Mercedes-Benz 250 is newer by 5 year(s). Which means there will be less support and parts availability for 1980 Simca 1309. In addition, the cost of maintenance, including insurance, on 1980 Simca 1309 would be higher. At 2,497 cc (5 cylinders), 1985 Mercedes-Benz 250 is equipped with a bigger engine. In terms of performance, 1985 Mercedes-Benz 250 (94 HP @ 4600 RPM) has 7 more horse power than 1980 Simca 1309. (87 HP @ 5400 RPM). In normal driving conditions, 1985 Mercedes-Benz 250 should accelerate faster than 1980 Simca 1309. With that said, vehicle weight also plays an important factor in acceleration. 1985 Mercedes-Benz 250 weights approximately 260 kg more than 1980 Simca 1309. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Mercedes-Benz 250 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1985 Mercedes-Benz 250. However, in wet, icy, snow, or gravel driving conditions, 1980 Simca 1309, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1985 Mercedes-Benz 250 (158 Nm @ 2600 RPM) has 24 more torque (in Nm) than 1980 Simca 1309. (134 Nm @ 3000 RPM). This means 1985 Mercedes-Benz 250 will have an easier job in driving up hills or pulling heavy equipment than 1980 Simca 1309. 1980 Simca 1309 has automatic transmission and 1985 Mercedes-Benz 250 has manual transmission. 1985 Mercedes-Benz 250 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Simca 1309 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1985 Mercedes-Benz 250 | 1980 Simca 1309 | |
| Make | Mercedes-Benz | Simca |
| Model | 250 | 1309 |
| Year Released | 1985 | 1980 |
| Engine Position | Front | Front |
| Engine Size | 2497 cc | 1592 cc |
| Engine Cylinders | 5 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 94 HP | 87 HP |
| Engine RPM | 4600 RPM | 5400 RPM |
| Torque | 158 Nm | 134 Nm |
| Torque RPM | 2600 RPM | 3000 RPM |
| Engine Bore Size | 87 mm | 80.6 mm |
| Engine Stroke Size | 84 mm | 78 mm |
| Engine Compression Ratio | 22.0:1 | 9.4:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Vehicle Weight | 1370 kg | 1110 kg |
| Vehicle Length | 4750 mm | 4260 mm |
| Vehicle Width | 1750 mm | 1690 mm |
| Vehicle Height | 1450 mm | 1410 mm |
| Wheelbase Size | 2810 mm | 2610 mm |
