1985 Mercedes-Benz 300 vs. 2010 Chrysler Sebring
To start off, 2010 Chrysler Sebring is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1985 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1985 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 2010 Chrysler Sebring (173 HP @ 6000 RPM) has 60 more horse power than 1985 Mercedes-Benz 300. (113 HP @ 4600 RPM) In normal driving conditions, 2010 Chrysler Sebring should accelerate faster than 1985 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 2010 Chrysler Sebring weights approximately 500 kg more than 1985 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1985 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Chrysler Sebring (225 Nm @ 4400 RPM) has 40 more torque (in Nm) than 1985 Mercedes-Benz 300. (185 Nm @ 2800 RPM). This means 2010 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1985 Mercedes-Benz 300. 2010 Chrysler Sebring has automatic transmission and 1985 Mercedes-Benz 300 has manual transmission. 1985 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1985 Mercedes-Benz 300 | 2010 Chrysler Sebring | |
| Make | Mercedes-Benz | Chrysler |
| Model | 300 | Sebring |
| Year Released | 1985 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 2996 cc | 2360 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 113 HP | 173 HP |
| Engine RPM | 4600 RPM | 6000 RPM |
| Torque | 185 Nm | 225 Nm |
| Torque RPM | 2800 RPM | 4400 RPM |
| Engine Compression Ratio | 22.0:1 | 10.5:1 |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1410 kg | 1910 kg |
| Vehicle Length | 4750 mm | 4850 mm |
| Vehicle Width | 1750 mm | 1810 mm |
| Vehicle Height | 1440 mm | 1510 mm |
| Wheelbase Size | 2810 mm | 2770 mm |
| Fuel Tank Capacity | 70 L | 64 L |
