1985 Peugeot 309 vs. 2010 Mercedes-Benz E

To start off, 2010 Mercedes-Benz E is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Peugeot 309. In addition, the cost of maintenance, including insurance, on 1985 Peugeot 309 would be higher. At 6,200 cc (8 cylinders), 2010 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2010 Mercedes-Benz E (518 HP @ 6800 RPM) has 443 more horse power than 1985 Peugeot 309. (75 HP @ 5800 RPM) In normal driving conditions, 2010 Mercedes-Benz E should accelerate faster than 1985 Peugeot 309. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mercedes-Benz E weights approximately 971 kg more than 1985 Peugeot 309. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 1985 Peugeot 309, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mercedes-Benz E (630 Nm) has 515 more torque (in Nm) than 1985 Peugeot 309. (115 Nm). This means 2010 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 1985 Peugeot 309. 2010 Mercedes-Benz E has automatic transmission and 1985 Peugeot 309 has manual transmission. 1985 Peugeot 309 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mercedes-Benz E will be easier to drive especially in heavy traffic.

Compare all specifications:

1985 Peugeot 309 2010 Mercedes-Benz E
Make Peugeot Mercedes-Benz
Model 309 E
Year Released 1985 2010
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1360 cc 6200 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Horse Power 75 HP 518 HP
Engine RPM 5800 RPM 6800 RPM
Torque 115 Nm 630 Nm
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 870 kg 1841 kg
Vehicle Length 4060 mm 4887 mm
Vehicle Height 1380 mm 1443 mm
Wheelbase Size 2480 mm 2873 mm