1985 Pontiac Fiero vs. 2010 Alfa Romeo Brera
To start off, 2010 Alfa Romeo Brera is newer by 25 year(s). Which means there will be less support and parts availability for 1985 Pontiac Fiero. In addition, the cost of maintenance, including insurance, on 1985 Pontiac Fiero would be higher. At 2,827 cc (6 cylinders), 1985 Pontiac Fiero is equipped with a bigger engine. In terms of performance, 2010 Alfa Romeo Brera (182 HP @ 6500 RPM) has 42 more horse power than 1985 Pontiac Fiero. (140 HP @ 4500 RPM) In normal driving conditions, 2010 Alfa Romeo Brera should accelerate faster than 1985 Pontiac Fiero. With that said, vehicle weight also plays an important factor in acceleration. 2010 Alfa Romeo Brera weights approximately 279 kg more than 1985 Pontiac Fiero. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1985 Pontiac Fiero is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1985 Pontiac Fiero. However, in wet, icy, snow, or gravel driving conditions, 2010 Alfa Romeo Brera, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Alfa Romeo Brera (230 Nm) has 10 more torque (in Nm) than 1985 Pontiac Fiero. (220 Nm). This means 2010 Alfa Romeo Brera will have an easier job in driving up hills or pulling heavy equipment than 1985 Pontiac Fiero. 1985 Pontiac Fiero has automatic transmission and 2010 Alfa Romeo Brera has manual transmission. 2010 Alfa Romeo Brera will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1985 Pontiac Fiero will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1985 Pontiac Fiero | 2010 Alfa Romeo Brera | |
| Make | Pontiac | Alfa Romeo |
| Model | Fiero | Brera |
| Year Released | 1985 | 2010 |
| Body Type | Coupe | Hatchback |
| Engine Position | Middle | Front |
| Engine Size | 2827 cc | 2198 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 140 HP | 182 HP |
| Engine RPM | 4500 RPM | 6500 RPM |
| Torque | 220 Nm | 230 Nm |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 2 seats | 4 seats |
| Number of Doors | 2 doors | 3 doors |
| Vehicle Weight | 1266 kg | 1545 kg |
| Vehicle Length | 4200 mm | 4420 mm |
| Vehicle Width | 1760 mm | 1840 mm |
| Vehicle Height | 1200 mm | 1350 mm |
| Wheelbase Size | 2380 mm | 2530 mm |
