1986 Alfa Romeo Arna vs. 2007 Lancia Thesis

To start off, 2007 Lancia Thesis is newer by 21 year(s). Which means there will be less support and parts availability for 1986 Alfa Romeo Arna. In addition, the cost of maintenance, including insurance, on 1986 Alfa Romeo Arna would be higher. At 2,446 cc (5 cylinders), 2007 Lancia Thesis is equipped with a bigger engine. In terms of performance, 2007 Lancia Thesis (168 HP @ 6000 RPM) has 106 more horse power than 1986 Alfa Romeo Arna. (62 HP @ 6000 RPM) In normal driving conditions, 2007 Lancia Thesis should accelerate faster than 1986 Alfa Romeo Arna. With that said, vehicle weight also plays an important factor in acceleration. 2007 Lancia Thesis weights approximately 836 kg more than 1986 Alfa Romeo Arna. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2007 Lancia Thesis (226 Nm @ 3500 RPM) has 138 more torque (in Nm) than 1986 Alfa Romeo Arna. (88 Nm @ 3200 RPM). This means 2007 Lancia Thesis will have an easier job in driving up hills or pulling heavy equipment than 1986 Alfa Romeo Arna.

Compare all specifications:

1986 Alfa Romeo Arna 2007 Lancia Thesis
Make Alfa Romeo Lancia
Model Arna Thesis
Year Released 1986 2007
Engine Position Front Front
Engine Size 1185 cc 2446 cc
Engine Cylinders 4 cylinders 5 cylinders
Engine Type in-line in-line
Horse Power 62 HP 168 HP
Engine RPM 6000 RPM 6000 RPM
Torque 88 Nm 226 Nm
Torque RPM 3200 RPM 3500 RPM
Fuel Type Gasoline Gasoline - Premium
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Vehicle Weight 850 kg 1686 kg
Vehicle Length 4010 mm 4890 mm
Vehicle Width 1630 mm 1840 mm
Vehicle Height 1350 mm 1470 mm
Wheelbase Size 2430 mm 2810 mm