1986 BMW 325 vs. 2010 Nissan NP300

To start off, 2010 Nissan NP300 is newer by 24 year(s). Which means there will be less support and parts availability for 1986 BMW 325. In addition, the cost of maintenance, including insurance, on 1986 BMW 325 would be higher. At 2,493 cc (6 cylinders), 1986 BMW 325 is equipped with a bigger engine. In terms of performance, 1986 BMW 325 (171 HP @ 5800 RPM) has 40 more horse power than 2010 Nissan NP300. (131 HP @ 3500 RPM). In normal driving conditions, 1986 BMW 325 should accelerate faster than 2010 Nissan NP300.

Because 2010 Nissan NP300 is four wheel drive (4WD), it will have significant more traction and grip than 1986 BMW 325. In wet, icy, snow, or gravel driving conditions, 2010 Nissan NP300 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Nissan NP300 (304 Nm @ 2000 RPM) has 78 more torque (in Nm) than 1986 BMW 325. (226 Nm @ 4000 RPM). This means 2010 Nissan NP300 will have an easier job in driving up hills or pulling heavy equipment than 1986 BMW 325.

Compare all specifications:

1986 BMW 325 2010 Nissan NP300
Make BMW Nissan
Model 325 NP300
Year Released 1986 2010
Body Type Convertible Pickup
Engine Position Front Front
Engine Size 2493 cc 2486 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 171 HP 131 HP
Engine RPM 5800 RPM 3500 RPM
Torque 226 Nm 304 Nm
Torque RPM 4000 RPM 2000 RPM
Engine Compression Ratio 9.7:1 16.5:1
Fuel Type Gasoline Diesel
Drive Type Rear 4WD
Transmission Type Manual Manual
Number of Doors 2 doors 2 doors
Vehicle Length 4330 mm 5180 mm
Vehicle Width 1650 mm 1700 mm
Vehicle Height 1390 mm 1630 mm
Wheelbase Size 2630 mm 2960 mm
Fuel Tank Capacity 90 L 75 L