1986 BMW M3 vs. 1984 Ford Capri

To start off, 1986 BMW M3 is newer by 2 year(s). Which means there will be less support and parts availability for 1984 Ford Capri. In addition, the cost of maintenance, including insurance, on 1984 Ford Capri would be higher. At 2,790 cc (6 cylinders), 1984 Ford Capri is equipped with a bigger engine. In terms of performance, 1986 BMW M3 (197 HP @ 6750 RPM) has 37 more horse power than 1984 Ford Capri. (160 HP @ 5700 RPM). In normal driving conditions, 1986 BMW M3 should accelerate faster than 1984 Ford Capri. With that said, vehicle weight also plays an important factor in acceleration. 1984 Ford Capri weights approximately 60 kg more than 1986 BMW M3.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 BMW M3 (240 Nm @ 4750 RPM) has 19 more torque (in Nm) than 1984 Ford Capri. (221 Nm @ 4300 RPM). This means 1986 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 1984 Ford Capri.

Compare all specifications:

1986 BMW M3 1984 Ford Capri
Make BMW Ford
Model M3 Capri
Year Released 1986 1984
Body Type Coupe Coupe
Engine Position Front Front
Engine Size 2302 cc 2790 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 197 HP 160 HP
Engine RPM 6750 RPM 5700 RPM
Torque 240 Nm 221 Nm
Torque RPM 4750 RPM 4300 RPM
Engine Bore Size 93.4 mm 93 mm
Engine Stroke Size 84 mm 68.5 mm
Engine Compression Ratio 10.5:1 9.2:1
Top Speed 235 km/hour 203 km/hour
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1170 kg 1230 kg
Vehicle Length 4350 mm 4450 mm
Vehicle Width 1690 mm 1710 mm
Vehicle Height 1370 mm 1350 mm
Wheelbase Size 2570 mm 2610 mm