1986 Cadillac Seville vs. 2013 BMW 3 Series

To start off, 2013 BMW 3 Series is newer by 27 year(s). Which means there will be less support and parts availability for 1986 Cadillac Seville. In addition, the cost of maintenance, including insurance, on 1986 Cadillac Seville would be higher. At 4,127 cc (8 cylinders), 1986 Cadillac Seville is equipped with a bigger engine. In terms of performance, 2013 BMW 3 Series (227 HP @ 6500 RPM) has 98 more horse power than 1986 Cadillac Seville. (129 HP @ 4200 RPM) In normal driving conditions, 2013 BMW 3 Series should accelerate faster than 1986 Cadillac Seville. With that said, vehicle weight also plays an important factor in acceleration. 2013 BMW 3 Series weights approximately 215 kg more than 1986 Cadillac Seville. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 BMW 3 Series is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 BMW 3 Series. However, in wet, icy, snow, or gravel driving conditions, 1986 Cadillac Seville, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 BMW 3 Series (271 Nm @ 2750 RPM) has 1 more torque (in Nm) than 1986 Cadillac Seville. (270 Nm @ 2200 RPM). This means 2013 BMW 3 Series will have an easier job in driving up hills or pulling heavy equipment than 1986 Cadillac Seville. 1986 Cadillac Seville has automatic transmission and 2013 BMW 3 Series has manual transmission. 2013 BMW 3 Series will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Cadillac Seville will be easier to drive especially in heavy traffic.

Compare all specifications:

1986 Cadillac Seville 2013 BMW 3 Series
Make Cadillac BMW
Model Seville 3 Series
Year Released 1986 2013
Body Type Sedan Convertible
Engine Position Front Front
Engine Size 4127 cc 2979 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type V in-line
Horse Power 129 HP 227 HP
Engine RPM 4200 RPM 6500 RPM
Torque 270 Nm 271 Nm
Torque RPM 2200 RPM 2750 RPM
Engine Bore Size 88 mm 85 mm
Engine Stroke Size 84 mm 88 mm
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Automatic 6-speed manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1520 kg 1735 kg
Vehicle Length 4810 mm 4620 mm
Vehicle Width 1830 mm 1961 mm
Vehicle Height 1370 mm 1395 mm
Wheelbase Size 2750 mm 2760 mm