1986 Chrysler Conquest vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 24 year(s). Which means there will be less support and parts availability for 1986 Chrysler Conquest. In addition, the cost of maintenance, including insurance, on 1986 Chrysler Conquest would be higher. At 2,555 cc (4 cylinders), 1986 Chrysler Conquest is equipped with a bigger engine. In terms of performance, 1986 Chrysler Conquest (185 HP @ 5000 RPM) has 37 more horse power than 2010 Mazda 3. (148 HP @ 6500 RPM). In normal driving conditions, 1986 Chrysler Conquest should accelerate faster than 2010 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1986 Chrysler Conquest weights approximately 24 kg more than 2010 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Chrysler Conquest (318 Nm @ 2500 RPM) has 135 more torque (in Nm) than 2010 Mazda 3. (183 Nm @ 4500 RPM). This means 1986 Chrysler Conquest will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 3.

Compare all specifications:

1986 Chrysler Conquest 2010 Mazda 3
Make Chrysler Mazda
Model Conquest 3
Year Released 1986 2010
Engine Position Front Front
Engine Size 2555 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 185 HP 148 HP
Engine RPM 5000 RPM 6500 RPM
Torque 318 Nm 183 Nm
Torque RPM 2500 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Vehicle Weight 1325 kg 1301 kg
Vehicle Length 4410 mm 4590 mm
Vehicle Width 1690 mm 1755 mm
Vehicle Height 1280 mm 1471 mm
Wheelbase Size 2450 mm 2639 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]