1986 Chrysler ES vs. 2005 Nissan Altima

To start off, 2005 Nissan Altima is newer by 19 year(s). Which means there will be less support and parts availability for 1986 Chrysler ES. In addition, the cost of maintenance, including insurance, on 1986 Chrysler ES would be higher. At 2,500 cc (4 cylinders), 1986 Chrysler ES is equipped with a bigger engine. In terms of performance, 2005 Nissan Altima (175 HP @ 3600 RPM) has 75 more horse power than 1986 Chrysler ES. (100 HP @ 4800 RPM) In normal driving conditions, 2005 Nissan Altima should accelerate faster than 1986 Chrysler ES. With that said, vehicle weight also plays an important factor in acceleration. 2005 Nissan Altima weights approximately 186 kg more than 1986 Chrysler ES. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Nissan Altima (244 Nm) has 61 more torque (in Nm) than 1986 Chrysler ES. (183 Nm). This means 2005 Nissan Altima will have an easier job in driving up hills or pulling heavy equipment than 1986 Chrysler ES.

Compare all specifications:

1986 Chrysler ES 2005 Nissan Altima
Make Chrysler Nissan
Model ES Altima
Year Released 1986 2005
Engine Position Front Front
Engine Size 2500 cc 2490 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 100 HP 175 HP
Engine RPM 4800 RPM 3600 RPM
Torque 183 Nm 244 Nm
Engine Bore Size 87.5 mm 89 mm
Engine Stroke Size 104 mm 100 mm
Engine Compression Ratio 8.7:1 9.5:1
Drive Type Front Front
Number of Seats 7 seats 5 seats
Vehicle Weight 1175 kg 1361 kg
Vehicle Length 4370 mm 4890 mm
Vehicle Width 1720 mm 1790 mm
Vehicle Height 1350 mm 1480 mm
Wheelbase Size 2470 mm 2760 mm