1986 Dodge Conquest vs. 1988 Nissan Micra
To start off, 1988 Nissan Micra is newer by 2 year(s). Which means there will be less support and parts availability for 1986 Dodge Conquest. In addition, the cost of maintenance, including insurance, on 1986 Dodge Conquest would be higher. At 2,555 cc (4 cylinders), 1986 Dodge Conquest is equipped with a bigger engine. In terms of performance, 1986 Dodge Conquest (143 HP @ 5000 RPM) has 94 more horse power than 1988 Nissan Micra. (49 HP @ 6000 RPM). In normal driving conditions, 1986 Dodge Conquest should accelerate faster than 1988 Nissan Micra. With that said, vehicle weight also plays an important factor in acceleration. 1986 Dodge Conquest weights approximately 615 kg more than 1988 Nissan Micra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Dodge Conquest (251 Nm @ 2500 RPM) has 178 more torque (in Nm) than 1988 Nissan Micra. (73 Nm @ 3600 RPM). This means 1986 Dodge Conquest will have an easier job in driving up hills or pulling heavy equipment than 1988 Nissan Micra.
Compare all specifications:
1986 Dodge Conquest | 1988 Nissan Micra | |
Make | Dodge | Nissan |
Model | Conquest | Micra |
Year Released | 1986 | 1988 |
Engine Size | 2555 cc | 988 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 143 HP | 49 HP |
Engine RPM | 5000 RPM | 6000 RPM |
Torque | 251 Nm | 73 Nm |
Torque RPM | 2500 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Vehicle Weight | 1280 kg | 665 kg |
Vehicle Length | 4410 mm | 3770 mm |
Vehicle Width | 1690 mm | 1570 mm |
Vehicle Height | 1320 mm | 1400 mm |
Wheelbase Size | 2450 mm | 2310 mm |