1986 Donkervoort S8 vs. 1987 Acura Integra
To start off, 1987 Acura Integra is newer by 1 year(s). Which means there will be less support and parts availability for 1986 Donkervoort S8. In addition, the cost of maintenance, including insurance, on 1986 Donkervoort S8 would be higher. At 1,993 cc (4 cylinders), 1986 Donkervoort S8 is equipped with a bigger engine. In terms of performance, 1987 Acura Integra (125 HP @ 6500 RPM) has 9 more horse power than 1986 Donkervoort S8. (116 HP @ 5500 RPM) In normal driving conditions, 1987 Acura Integra should accelerate faster than 1986 Donkervoort S8.
Because 1986 Donkervoort S8 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Donkervoort S8. However, in wet, icy, snow, or gravel driving conditions, 1987 Acura Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Donkervoort S8 (166 Nm @ 4000 RPM) has 27 more torque (in Nm) than 1987 Acura Integra. (139 Nm @ 5500 RPM). This means 1986 Donkervoort S8 will have an easier job in driving up hills or pulling heavy equipment than 1987 Acura Integra.
Compare all specifications:
1986 Donkervoort S8 | 1987 Acura Integra | |
Make | Donkervoort | Acura |
Model | S8 | Integra |
Year Released | 1986 | 1987 |
Engine Position | Front | Front |
Engine Size | 1993 cc | 1600 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 116 HP | 125 HP |
Engine RPM | 5500 RPM | 6500 RPM |
Torque | 166 Nm | 139 Nm |
Torque RPM | 4000 RPM | 5500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Seats | 2 seats | 5 seats |
Vehicle Length | 3610 mm | 4355 mm |
Vehicle Width | 1740 mm | 1665 mm |
Vehicle Height | 1110 mm | 1290 mm |