1986 Ford Laser vs. 1998 Mazda MX-3
To start off, 1998 Mazda MX-3 is newer by 12 year(s). Which means there will be less support and parts availability for 1986 Ford Laser. In addition, the cost of maintenance, including insurance, on 1986 Ford Laser would be higher. At 1,598 cc (4 cylinders), 1998 Mazda MX-3 is equipped with a bigger engine. In terms of performance, 1998 Mazda MX-3 (106 HP) has 40 more horse power than 1986 Ford Laser. (66 HP) In normal driving conditions, 1998 Mazda MX-3 should accelerate faster than 1986 Ford Laser. With that said, vehicle weight also plays an important factor in acceleration. 1998 Mazda MX-3 weights approximately 259 kg more than 1986 Ford Laser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1998 Mazda MX-3 (134 Nm @ 3600 RPM) has 40 more torque (in Nm) than 1986 Ford Laser. (94 Nm @ 3500 RPM). This means 1998 Mazda MX-3 will have an easier job in driving up hills or pulling heavy equipment than 1986 Ford Laser.
Compare all specifications:
1986 Ford Laser | 1998 Mazda MX-3 | |
Make | Ford | Mazda |
Model | Laser | MX-3 |
Year Released | 1986 | 1998 |
Engine Position | Front | Front |
Engine Size | 1296 cc | 1598 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 66 HP | 106 HP |
Torque | 94 Nm | 134 Nm |
Torque RPM | 3500 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 4 seats |
Vehicle Weight | 800 kg | 1059 kg |
Vehicle Length | 4000 mm | 4230 mm |
Vehicle Width | 1660 mm | 1700 mm |
Vehicle Height | 1400 mm | 1320 mm |
Wheelbase Size | 2410 mm | 2460 mm |