1986 Ginetta G32 vs. 1950 Jeep CJ3A
To start off, 1986 Ginetta G32 is newer by 36 year(s). Which means there will be less support and parts availability for 1950 Jeep CJ3A. In addition, the cost of maintenance, including insurance, on 1950 Jeep CJ3A would be higher. At 2,199 cc (4 cylinders), 1950 Jeep CJ3A is equipped with a bigger engine. In terms of performance, 1986 Ginetta G32 (132 HP @ 5750 RPM) has 73 more horse power than 1950 Jeep CJ3A. (59 HP @ 3600 RPM). In normal driving conditions, 1986 Ginetta G32 should accelerate faster than 1950 Jeep CJ3A. With that said, vehicle weight also plays an important factor in acceleration. 1950 Jeep CJ3A weights approximately 357 kg more than 1986 Ginetta G32.
Because 1950 Jeep CJ3A is four wheel drive (4WD), it will have significant more traction and grip than 1986 Ginetta G32. In wet, icy, snow, or gravel driving conditions, 1950 Jeep CJ3A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Ginetta G32 (180 Nm @ 2750 RPM) has 35 more torque (in Nm) than 1950 Jeep CJ3A. (145 Nm @ 3600 RPM). This means 1986 Ginetta G32 will have an easier job in driving up hills or pulling heavy equipment than 1950 Jeep CJ3A.
Compare all specifications:
1986 Ginetta G32 | 1950 Jeep CJ3A | |
Make | Ginetta | Jeep |
Model | G32 | CJ3A |
Year Released | 1986 | 1950 |
Engine Position | Middle | Front |
Engine Size | 1595 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 132 HP | 59 HP |
Engine RPM | 5750 RPM | 3600 RPM |
Torque | 180 Nm | 145 Nm |
Torque RPM | 2750 RPM | 3600 RPM |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 753 kg | 1110 kg |
Vehicle Length | 3770 mm | 3130 mm |
Vehicle Width | 1660 mm | 1460 mm |
Vehicle Height | 1170 mm | 1630 mm |
Wheelbase Size | 2220 mm | 2040 mm |