1986 Holden Camira vs. 2010 Fiat Ulysse

To start off, 2010 Fiat Ulysse is newer by 24 year(s). Which means there will be less support and parts availability for 1986 Holden Camira. In addition, the cost of maintenance, including insurance, on 1986 Holden Camira would be higher. At 2,179 cc (4 cylinders), 2010 Fiat Ulysse is equipped with a bigger engine. In terms of performance, 2010 Fiat Ulysse (126 HP @ 4000 RPM) has 43 more horse power than 1986 Holden Camira. (83 HP @ 4800 RPM) In normal driving conditions, 2010 Fiat Ulysse should accelerate faster than 1986 Holden Camira. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Ulysse weights approximately 773 kg more than 1986 Holden Camira. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Ulysse (314 Nm @ 2000 RPM) has 188 more torque (in Nm) than 1986 Holden Camira. (126 Nm @ 3600 RPM). This means 2010 Fiat Ulysse will have an easier job in driving up hills or pulling heavy equipment than 1986 Holden Camira.

Compare all specifications:

1986 Holden Camira 2010 Fiat Ulysse
Make Holden Fiat
Model Camira Ulysse
Year Released 1986 2010
Engine Position Front Front
Engine Size 1598 cc 2179 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 83 HP 126 HP
Engine RPM 4800 RPM 4000 RPM
Torque 126 Nm 314 Nm
Torque RPM 3600 RPM 2000 RPM
Fuel Type Gasoline Diesel
Drive Type Front Front
Transmission Type Manual Manual
Vehicle Weight 1015 kg 1788 kg
Vehicle Length 4350 mm 4730 mm
Vehicle Width 1670 mm 1870 mm
Vehicle Height 1360 mm 1760 mm
Wheelbase Size 2580 mm 2830 mm