1986 Holden Commodore vs. 2013 Mazda 3

To start off, 2013 Mazda 3 is newer by 27 year(s). Which means there will be less support and parts availability for 1986 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1986 Holden Commodore would be higher. At 2,962 cc (6 cylinders), 1986 Holden Commodore is equipped with a bigger engine. In terms of performance, 2013 Mazda 3 (165 HP @ 6000 RPM) has 12 more horse power than 1986 Holden Commodore. (153 HP @ 5200 RPM) In normal driving conditions, 2013 Mazda 3 should accelerate faster than 1986 Holden Commodore. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda 3 weights approximately 193 kg more than 1986 Holden Commodore. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1986 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 2013 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Holden Commodore (247 Nm @ 3600 RPM) has 19 more torque (in Nm) than 2013 Mazda 3. (228 Nm @ 4000 RPM). This means 1986 Holden Commodore will have an easier job in driving up hills or pulling heavy equipment than 2013 Mazda 3. 2013 Mazda 3 has automatic transmission and 1986 Holden Commodore has manual transmission. 1986 Holden Commodore will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1986 Holden Commodore 2013 Mazda 3
Make Holden Mazda
Model Commodore 3
Year Released 1986 2013
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 2962 cc 2489 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 153 HP 165 HP
Engine RPM 5200 RPM 6000 RPM
Torque 247 Nm 228 Nm
Torque RPM 3600 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1215 kg 1408 kg
Vehicle Length 4770 mm 4595 mm
Vehicle Width 1730 mm 1755 mm
Vehicle Height 1380 mm 1470 mm
Wheelbase Size 2670 mm 2640 mm