1986 Lancia Delta vs. 1986 Mazda 929

To start off, both 1986 Lancia Delta and 1986 Mazda 929 were released in the same year (1986). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,953 cc (6 cylinders), 1986 Mazda 929 is equipped with a bigger engine. In terms of performance, 1986 Mazda 929 (190 HP @ 5600 RPM) has 115 more horse power than 1986 Lancia Delta. (75 HP @ 5800 RPM) In normal driving conditions, 1986 Mazda 929 should accelerate faster than 1986 Lancia Delta. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mazda 929 weights approximately 690 kg more than 1986 Lancia Delta. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1986 Mazda 929 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Mazda 929. However, in wet, icy, snow, or gravel driving conditions, 1986 Lancia Delta, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mazda 929 (259 Nm @ 4500 RPM) has 154 more torque (in Nm) than 1986 Lancia Delta. (105 Nm @ 3400 RPM). This means 1986 Mazda 929 will have an easier job in driving up hills or pulling heavy equipment than 1986 Lancia Delta. 1986 Mazda 929 has automatic transmission and 1986 Lancia Delta has manual transmission. 1986 Lancia Delta will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mazda 929 will be easier to drive especially in heavy traffic.

Compare all specifications:

1986 Lancia Delta 1986 Mazda 929
Make Lancia Mazda
Model Delta 929
Year Released 1986 1986
Engine Position Front Front
Engine Size 1301 cc 2953 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 75 HP 190 HP
Engine RPM 5800 RPM 5600 RPM
Torque 105 Nm 259 Nm
Torque RPM 3400 RPM 4500 RPM
Engine Bore Size 86.4 mm 90 mm
Engine Stroke Size 55.5 mm 77.4 mm
Engine Compression Ratio 9.1:1 8.9:1
Drive Type Front Rear
Transmission Type Manual Automatic
Vehicle Weight 935 kg 1625 kg
Vehicle Length 3890 mm 4930 mm
Vehicle Width 1630 mm 1730 mm
Vehicle Height 1390 mm 1390 mm
Wheelbase Size 2480 mm 2720 mm