1986 Mercedes-Benz 300 vs. 1986 Honda Integra
To start off, both 1986 Mercedes-Benz 300 and 1986 Honda Integra were released in the same year (1986). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,960 cc (6 cylinders), 1986 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1986 Mercedes-Benz 300 (188 HP @ 5700 RPM) has 63 more horse power than 1986 Honda Integra. (125 HP @ 6500 RPM). In normal driving conditions, 1986 Mercedes-Benz 300 should accelerate faster than 1986 Honda Integra. With that said, vehicle weight also plays an important factor in acceleration. 1986 Mercedes-Benz 300 weights approximately 525 kg more than 1986 Honda Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1986 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 1986 Honda Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mercedes-Benz 300 (260 Nm @ 4800 RPM) has 121 more torque (in Nm) than 1986 Honda Integra. (139 Nm @ 5500 RPM). This means 1986 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 1986 Honda Integra. 1986 Mercedes-Benz 300 has automatic transmission and 1986 Honda Integra has manual transmission. 1986 Honda Integra will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1986 Mercedes-Benz 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
1986 Mercedes-Benz 300 | 1986 Honda Integra | |
Make | Mercedes-Benz | Honda |
Model | 300 | Integra |
Year Released | 1986 | 1986 |
Engine Position | Front | Front |
Engine Size | 2960 cc | 1590 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 188 HP | 125 HP |
Engine RPM | 5700 RPM | 6500 RPM |
Torque | 260 Nm | 139 Nm |
Torque RPM | 4800 RPM | 5500 RPM |
Engine Bore Size | 88.5 mm | 75 mm |
Engine Stroke Size | 80.3 mm | 90 mm |
Engine Compression Ratio | 10.0:1 | 9.3:1 |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1545 kg | 1020 kg |
Vehicle Length | 5170 mm | 4350 mm |
Vehicle Width | 2010 mm | 1670 mm |
Vehicle Height | 1450 mm | 1350 mm |
Wheelbase Size | 3080 mm | 2460 mm |