1986 Mercedes-Benz 300 vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 24 year(s). Which means there will be less support and parts availability for 1986 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1986 Mercedes-Benz 300 would be higher. At 2,962 cc (6 cylinders), 1986 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (215 HP @ 6500 RPM) has 30 more horse power than 1986 Mercedes-Benz 300. (185 HP @ 5700 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 1986 Mercedes-Benz 300. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 85 kg more than 1986 Mercedes-Benz 300. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 325 is four wheel drive (4WD), it will have significant more traction and grip than 1986 Mercedes-Benz 300. In wet, icy, snow, or gravel driving conditions, 2010 BMW 325 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 Mercedes-Benz 300 (260 Nm @ 4400 RPM) has 10 more torque (in Nm) than 2010 BMW 325. (250 Nm @ 2750 RPM). This means 1986 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 BMW 325. 2010 BMW 325 has automatic transmission and 1986 Mercedes-Benz 300 has manual transmission. 1986 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 BMW 325 will be easier to drive especially in heavy traffic.

Compare all specifications:

1986 Mercedes-Benz 300 2010 BMW 325
Make Mercedes-Benz BMW
Model 300 325
Year Released 1986 2010
Engine Position Front Front
Engine Size 2962 cc 2494 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 185 HP 215 HP
Engine RPM 5700 RPM 6500 RPM
Torque 260 Nm 250 Nm
Torque RPM 4400 RPM 2750 RPM
Engine Compression Ratio 10.0:1 11.0:1
Top Speed 210 km/hour 240 km/hour
Acceleration 0-100mph 8.2 seconds 8 seconds
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 5 doors
Vehicle Weight 1590 kg 1675 kg
Vehicle Length 4770 mm 4530 mm
Vehicle Width 1750 mm 1820 mm
Vehicle Height 1450 mm 1420 mm
Wheelbase Size 2810 mm 2770 mm
Fuel Consumption Overall 8.4 L/100km 9.4 L/100km
Fuel Tank Capacity 72 L 63 L